UNDER THE HOOD / INTEC LC700 AND LF700 FRAME 29 www.printmonthly.co.uk November / December 2024 - Issue 351 There was a time when anyone in a planning office would have rolled their eyes when they picked up a job which needed to be cut and finished. This opens up all the issues of getting dies produced and tested, the issues of delayed production whilst the printed substrate sits waiting for the dies to turn up, and finally if you find the client wants a change, the whole merry go round takes another spin. How do you overcome this? Clients want labels. This is a perfectly sensible request and one that is becoming more mainstream as boutique shops and outlets are popping up all over the high street demanding bespoke and short run label production. Previously this would have been impossible to achieve as the costs would just have outweighed any commercial benefit of trying to produce them. But there is a machine that can change both the perception of the label product and will not take up space in the studio unless you want it to. But don't worry, all will become clear. Intec has a new digital label cutting machine which turns label production on its head. The LC700 is a ‘on demand’ kiss cut label cutting machine which in this form is a sheet fed device, but with the clever inclusion of the LF700 Frame with which you can upgrade the machine to the LCF700 reel fed label cutting machine. Cutting at Speed At the heart of the concept is the fact the machine needs no dies, so all those expensive set up costs are set to one side. Added to this is a digital machine so that each label can be independently cut regardless of size and shape. A further plus side to the LC700 is the fact it is designed to be used unattended, so once set and programmed, the machine trundles off on its own. The fundamental reason for the unattended flexibility is the LC700 is able to pick up all the information it needs from a QR code on the sheet it is feeding into the cutting area and this data is then used to set the kiss cutting heads to produce whichever shape is needed. The QR codes and SmartMarks are generated through the ColorCut Pro software which can be integrated with whichever origination software you are using such as Adobe, Illustrator, or CorelDRAW. Operation of the machine by the use of the QR codes means no real experience is needed by the operator. The QR codes have all the information needed and apart from setting the feeder up for the sheet size, once the start button is pressed and the sheet has the QR code read, the LC700 takes full control. The reading of the QR codes is completed by a Vision3 high resolution CCD vision system and is fully integrated into the operating system of the LC700. There are further aspects of the LC700 which enhances the control you have over production in the form of two modes of cutting files. Direct Mode allows you to have full control over the production on the LC700 by allowing you to make any changes you need on the fly. HELD Mode is the second option which captures all of the information for the production and can then be held on any storage device which the cutter can use. The need for the main PC system is negated, making repeat work simple and easy. The LC700 can handle sheets such as LABEL CUTTING PLUS Intec has a compact and clever label printing machine that can fit into the smallest part of the studio, with the unique benefit of being able to upsize to its bigger sibling the LCF700 reel-to-reel label cutting machine Max media size 300 x 750mm Min media size 150 x 190mm Media thickness 0.14 to 0.35mm Max speed 1060mm/s Cut accuracy +/-0.1mm Statistics
RkJQdWJsaXNoZXIy MjM0NDIxOA==